Dear Students, Please write a summary review on any one of the following five pa

Dear Students, Please write a summary review on any one of the following five pa

Dear Students, Please write a summary review on any one of the following five papers by March 30. These papers were selected to cover a broad range of gas dynamics related topics to give you deeper insight to the complexity, scientific rigor and practicality of the field. I hope you will like the topics and will be able to select one for your review. Your review should focus on: a) what is the state of the art, b) what are the major contributions of this paper, and c) what are the major challenges in the field based on this paper. Note there is a six-page limit for this review. If appropriate, add references of any other papers as needed. Here are two examples of manuscript reviews attached. for peer-reviewed journals. You may not have to follow a similar format. As always, feel free to discuss with me if you have any doubts or concerns. ATTACHED FILES, ONE IS THE REQUIRED REVIEW AND THE OTHER IS THE EXAMPLE. FILE NAMED

Civil engineering This is my project topic and I already did the design of thre

Civil engineering
This is my project topic and I already did the design of thre

Civil engineering
This is my project topic and I already did the design of three story building using Staad pro program
( I need to do chapter1, General, Objectives, Scope of work )
-General- An overview of Dammam housing, as well as a comparison between the ratio of villas and apartments in dammam, and so on
This is table of contents I want only chapter1
Table of Contents
Abstract​1
Chapter 1 Introduction​
1.1 General​
1.2 Objectives​
1.3 Scope of work​
Chapter 2 Project Analysis​
2.1 Project overview​
2.2 Design criteria​
2.3 Loadings​
2.4 Load combination​
2.5 Structural analysis​
Chapter 3 Structural Design​
3.1 Design of beams and columns​
3.2 Beams design output​
3.3 Columns design output​
3.4 Design output of Beam 1​
3.5 Design output of Column 1​
Chapter 4 Manual Verification of the Structural Design​
4.1 Manual verification for Beam 1​
4.2 Manual verification for Column 1​
Chapter 5 Safety and Economics​
5.1 Safety measurements​
5.2 Cost estimation and economic factors​
Chapter 6 Summary and Concluding Remarks​
References​

I. Introduction A. Background 1. Brief overview of traditional large-sc

I. Introduction
A. Background
1. Brief overview of traditional large-sc

I. Introduction
A. Background
1. Brief overview of traditional large-scale nuclear reactors
2. Introduction to small-scale nuclear reactors (SMRs)
B. Motivation
1. Need for alternative and sustainable energy sources
2. Advantages of SMRs in addressing energy challenges
II. Technical Aspects of SMRs
A. Overview of Small Modular Reactors
1. Definition and characteristics
2. Various designs (light-water reactors, high-temperature gas-cooled reactors, molten salt reactors)
B. Safety Features
1. Passive safety systems
2. Comparison with safety features of traditional reactors
C. Scalability and Flexibility
1. Modular design and construction
2. Applications beyond electricity generation (industrial processes, desalination)
III. Economic Considerations
A. Capital Costs
1. Comparison with large-scale reactors
2. Manufacturing and construction advantages
B. Construction Times
1. Shorter timelines due to modular design
2. Implications for project financing and return on investment
IV. Regulatory Challenges and Framework
A. Licensing Requirements
1. Adaptation of existing regulations
2. Addressing safety concerns and risk assessment
B. Proliferation Risks
1. Measures to mitigate proliferation risks
2. International cooperation and standardization
V. Public Perception and Social Acceptance
A. Public Concerns
1. Safety and environmental impact
2. Nuclear waste management
B. Communication Strategies
1. Addressing public concerns through effective communication
2. Public engagement and education initiatives
VI. **Case Studies and Applications**
A. Successful Deployments
1. Highlighting existing SMR projects
2. Lessons learned and best practices
B. Potential Applications
1. Exploration of various sectors benefiting from SMRs
2. Future possibilities and emerging markets
VII. Research and Development Initiatives
A. Current State of R&D
1. Collaborative efforts between governments, industry, and research institutions
2. Ongoing advancements and innovations
B. Future Prospects
1. Potential breakthroughs and technological advancements
2. R&D needs for further SMR development
VIII. Conclusion
A. Summary of Key Findings
1. Technical advancements and safety features
2. Economic viability and regulatory challenges
B. Recommendations and Future Directions
1. Policy recommendations
2. Areas for further research and development
IX. References
– Citations of relevant literature, research papers, and authoritative sources.

Emphasize the importance of an organization’s culture – its mission, vision, and values

Emphasize the importance of an organization’s culture – its mission, vision, and values

The objective of this assignment is to emphasize the importance of an organization’s culture – its mission, vision, and
values – while learning how these are translated into organizational actions.
Choose a company that you are interested in. It may be your current employer, a company that you admire, a company
that you would like to work for – it doesn’t matter why you choose this company. However there ARE two requirements:
1. The company must be a publicly traded company. That means the company must be listed on the NYSE or
NASDAQ stock exchange.
2. You cannot choose Amazon, Bank of America, Caterpillar, Continental Group, General Electric, General Motors,
or Tesla.
For your chosen company:
• Identify a competitor. “Competitor” means another company in the same industry. The competitor must also be
a publicly traded company. That means the competitor must be listed on the NYSE or NASDAQ stock exchange.
• Briefly describe your chosen company, competitor, and the industry.
For each company:
• Summarize the company’s mission/vision/purpose. What is the company attempting to do? Identify one
example of how the company is executing its mission/vision/purpose.
• Summarize the company’s values. What principles guide the company in how its mission is accomplished?
Identify two examples of how the company is demonstrating its values.
• Discuss the company’s organizational structure in terms of its leadership team, customers, markets,
product/service offerings, and key functions. Explain how the structure supports the company’s
mission/vision/purpose.
Considering both companies:
• Compare the mission/vision/purpose for the companies, both similarities and differences.
• Compare the values of the companies, both similarities and differences.
• Discuss which of the values a small start-up company should adopt and why.
• Compare the organizational structures for the companies, both similarities and differences.
This is an individual assignment, not a team activity.
You cannot re-use work that was submitted for another course or previous section of this course.
You will submit your work via a Canvas assignment, which checks submissions for plagiarism potential. The use of
generative artificial intelligence (AI) is not allowed for this assignment; your work will also be checked for AI-generated
text. Both plagiarism and use of generative AI for this assignment violate ASU’s Student Academic Integrity policy and
will be managed in accordance with that policy.
Writing Support at ASU
You can find information on writing centers, for both undergraduate and graduate students, and other writing resources
on the Canvas course for this class.
Writing Guidelines
Your ability to communicate clearly through language is part of the grading criteria. Your work will be evaluated on your
ability to organize your writing, demonstrate original thought, develop ideas, and apply critical thinking. Do not simply
provide a bulleted list of answers to the requirements.
• Use appropriate grammar, spelling, and punctuation. No first-person narratives!
• Write in your own words; do not simply “copy & paste” from your references.
o If you quote material with in-text citations, be mindful of the proportion. You must provide context and
interpretation. The #1 area for deducted points is lack of original thought.
o If you use material without appropriate attribution, you are committing plagiarism. This is an Academic
Integrity violation, and it will be managed in accordance with that policy.
• Cite your sources of information and provide references using the Chicago style “Author-Date” system. This is
the #2 area for deducted points.
Grading Criteria
The assignment is worth 100 points. The following criteria will be used to evaluate your work:
Item Requirement Points Page Limit
Cover Page • Assignment title, student name and date 5 1
Brief
Descriiption
• Descriiption of chosen company, competitor, and industry 5 1
Chosen
company
and
Competitor
For the chosen company and a competitor:
• Summary of mission/vision/purpose, with example
• Summary of values, with examples
• Discussion of organizational structure
40 pts
No more
than 12
pages for
these items
Both
companies
For both companies:
• Comparison of mission/vision/purpose
• Comparison of values
• Discussion of values for small start-up company
• Comparison of organizational structures
40 pts
List of
References
• Complete and correct bibliographic information.
• The required citation style is the Chicago style “Author-Date” system.
More information here: ASU Libraries – Citation Styles: Chicago,
Purdue OWL and Chicago-Style Citation Quick Guide
10
Unlimited
Appendix • Includes any supporting material that may be useful to the reader
but is not necessary to include in the main body of the report.
• Any material in this section should be referenced within the main
body of the report.
0
Unlimited
Format Requirements
Your work must conform to the following format requirements.
File Type Word. Other file types will not be graded.
Font Times New Roman, size 12 pt, must be used for the text portion of the document. Larger sizes may be
used for headings and titles, and smaller sizes may be used for footnotes and illustration callouts.
Layout Standard margins, line spacing, indentation, and paragraphs; One column; with a page number on
each page.
Figures and
Tables
• Every figure and table should have a label and caption (e.g., “Figure 1: …”,“Table 1: …”)
• Every figure and table should be referenced within the text, including those in an appendix
Potential Sources of Information
Be sure to cite information sources and to include those sources on a list of references. Do not cite Wikipedia, or any
other encyclopedia, as a reference. You will lose points. Go to the list of References and Further Reading and read the
original material.
Company Information
Find the company’s web site and look for: “About us,” “Shareholder or Investor Information,” “Leadership Team”, “Who
we are,” “Products,” “Businesses,” “Markets,” “Corporate responsibility,” “Corporate citizenship,” “Code of Conduct,”
“Sustainability,” “Ethics, Corporate culture,” or similar.
Competitors
Company stock reports (potential source: nasdaq.com) are one way to identify competitors. So are recent articles in the
Wall Street Journal or other business periodicals

Develop a Feasibility Study Report with emphasis on engineering design on your assigned task.

Develop a Feasibility Study Report with emphasis on engineering design on your assigned task.

Hello! I am working on an Engineering Project Design related to geology/geotechnical engineering. I can provide sample papers and a course description for your reference. I am seeking a geologist/ engineering geologist to help me with this project.
Please check the attached sample paper
The writer can choose a topic as long as it relates to any Engineering design project in the Philippines. The author can gather accurate data or create hypothetical data.
I also want to ask if this topic is doable for this project. Please see the link. It is about constructing a water treatment facility in Antipolo, Philippines. You can reject it and give a project that is better than this.
https://www.philstar.com/business/2023/01/07/2235778/manila-water-building-p25-billion-plant-antipolo
Engineering Design Task: You have to develop a Feasibility Study Report with emphasis on engineering design on your assigned task. The engineering design must consider a complete data as a basis of your design. You can fabricate your subsurface data, and other design data hypothetically needed to generate your design of your assigned task. You have to make sure that everything are to be considered in your design, including, static, seismic condition, etc. and all other factors that may influence the stability of your proposed structure. Remember to think that your part as an engineer is only a portion of the feasibility study content of the Proposed project.
Project description: The deadline for the Engineering Project Design is 30 days from now, but I must receive a write-up every Wednesday at 8 Am Philippine time. This schedule will start next week. The project is a college-level engineering project design report, eight pages, double-spaced.
General Content of Deliverables: You are given the freedom to formulate the content of your Study and Design Report. As an example, the following minimum report composition can guide you:
EXECUTIVE SUMMARY
1.INTRODUCTION
2.PROJECT LOCATION MAP
3.PROJECT BACKGROUND
4.PREVIOUS WORKS AND AVAILABLE DATA
5.CURRENT WORK REQUIREMENTS
6.CURRENT WORK PLAN
7.METHODOLOGY OF WORKS
7.1GENERAL METHODS
7.2DESIGN GUIDELINES, CODES, AND STANDARDS
8.ENGINEERING DESIGN CONSIDERATIONS
9.CONCLUSIONS AND RECOMMENDATIONS
11. LIMITATIONS AND CLOSURES APPENDICES
Description of the course:
“Student groups will be required to prepare a feasibility study for a major geological engineering project., Proposals should conform to government regulations (i.e. consideration of safety, reliability, aesthetics, ethics and social and environmental impact) and should include cost analyzes and time lines. The feasibility study should be presented to a panel which is composed of faculty members and external evaluators. Assessment will be based on the technical presentation and content of the feasibility study. Application of Engineering Project Design in support of the student’s thesis project. The course focuses on engineering solutions and measures to mitigate engineering problems.”
Please see the attached sample paper.
Comments from Customer
The first part is the draft. The proposal contains the topic, title, the context/background of the study, relevant pictures, initial design plan to solve the problem, the problem that needs to be solved. it is just a short write up. I need to present this to my professor for approval. If approved, we can do the job until the given deadline.1 page is enough for the proposal

Construct a simulation model of the Mockingbird Airlines system. Each iteration of your simulation should assign a random number of shows/no-shows based on a binomial distribution.

Construct a simulation model of the Mockingbird Airlines system. Each iteration of your simulation should assign a random number of shows/no-shows based on a binomial distribution.

This assignment builds off of the Overbooking case study from Chapter 9 in the Clemen and Reilly text.
Your task: submit a single excel spreadsheet with the following:
1. Construct a simulation model of the Mockingbird Airlines system. Each iteration of your simulation should assign a random number of shows/no-shows based on a binomial distribution.
2. Mockingbird needs to decide between selling 16, 17, 18, or 19 seats per flight. Run your simulation 1,000 times for each possible decision and gather the results (i.e., the profit for each run).
3. Provide a table with the average profit and standard deviation of the profit for each of the four possible choices.
4. Expand your simulation model to include uncertainties for the no-show rate and the cost per bumped passenger. Model the no-show rate as a uniform distribution between 0.02 and 0.06. Instead of a fixed $225 + $100 per bumped passenger, model the cost per bumped passenger as a normal distribution with a mean of $300 and and standard deviation of $40.
5. Provide a table with the average profit and standard deviation of the profit for each of the four possible choices.

Assignment Content Write a 5-7 page APA paper discuss benefits and challenges of

Assignment Content
Write a 5-7 page APA paper discuss benefits and challenges of

Assignment Content
Write a 5-7 page APA paper discuss benefits and challenges of various organizational structures and the waterfall project management methodology.
Please include at least four references.
The following outline should be used for this paper (highlighted bullets should be used as subheaders within your paper).Cover Page
Introduction (overall for the paper – tell the audience what you will be discussing – this first introduction does not require a subheader – it should be the first paragraph of your paper right below the paper title on the first written page)
Body of Paper – subheaders and detail on the topic
Conclusion (tell the audience what you told them with a summary statement)
References Page
This would be considered a high-level cost benefit analysis.
**SafeAssign is turned on for this paper. Copying from others/sharing work is strictly forbidden

Assignment Content Write a 5-7 page APA paper discuss benefits and challenges of

Assignment Content
Write a 5-7 page APA paper discuss benefits and challenges of

Assignment Content
Write a 5-7 page APA paper discuss benefits and challenges of various organizational structures and the waterfall project management methodology.
Please include at least four references.
The following outline should be used for this paper (highlighted bullets should be used as subheaders within your paper).Cover Page
Introduction (overall for the paper – tell the audience what you will be discussing – this first introduction does not require a subheader – it should be the first paragraph of your paper right below the paper title on the first written page)
Body of Paper – subheaders and detail on the topic
Conclusion (tell the audience what you told them with a summary statement)
References Page
This would be considered a high-level cost benefit analysis.
**SafeAssign is turned on for this paper. Copying from others/sharing work is strictly forbidden.

Assignment Content Submit your recorded final presentationAssignment Format: MS

Assignment Content
Submit your recorded final presentationAssignment Format: MS

Assignment Content
Submit your recorded final presentationAssignment Format: MS Powerpoint Slide Deck; APA format
Submission Format: Blackboard Submission
Length: 8 – 10 slides; 10 minute Zoom Video maximum
Citations Required: 5-7 References
Points: 100 points out of 1,000 points course total
format for the slides are:Introduction: Amazon and the Case Study
Current State of the Business
Amazon Businesses
Supporting business and technology strategies behind those businesses
Three portions of the business that will drive the future of the business
Supporting business and technology strategies behind those future businesses
Summary
PowerPoint SpecificationsFollow the PowerPoint Rule of 6 (no more than 6 words per point, no more than 6 points per slide)
Limited/Meaningful Clipart or Pictures
MS Powerpoint Theme is required
MS Powerpoint Presentation Suggested Layout:Cover Slide – Include Unique Title, Full Name, Cohort #and Course Name, Date Submitted
Agenda Slide – Outline for the presentation – what will you tell them
8-10 slides related to the content
References Slide – List at least 5 – 7 references (APA format)
Requirements: follow instructions