Plant Biotechnology In Agriculture

Introduction

“Bio-technology” refers to the area of study in which the living organisms are used to produce the useful products through the manipulation of genes.

‘Genetic engineering” refers to the process that alters the genetic structure of an organism by removing or introducing DNA. Rice genome has provided the foundation to improve the cereals. In parallel, novel plant transformation systems have been proposed, notably with regard to plastid transformation and the removal of selectable marker genes in transgenic plants.

Despite the plasticity contributing to diversity of plant genomes, the organization of genes is conserved within large sections of chromosomes. Indeed, this technological progress enables us to insert useful genes into cultivated plants at an incomparably fast rate and, doubtless, in a much more precise manner than with conventional genetic methods.

Plant Transformation

Genetic engineering allows to transfer the useful genes from one organism to another. After undergoing this process, the genetically modified organism (GMO) consists of the characters that were altered in laboratory. These techniques can be applied generally to all living species: bacteria, fungi, viruses, animals, and plants. Transformation techniques and search for new selectable markers: The deliberate incorporation of genes in the nuclear genome of the plants can be done by:

  • Biolistic technique
  • Agrobacterium tumefaciens
  • Agrobacterium tumefaciens

The soil bacteria

Agrobacterium tumefaciens has the natural property of inducing tumors in certain plants by transmitting a plasmid (T-DNA). Biolistic technique- The interest of gene is coated with either the gold or tungsten particles and then are shot into the plant cell using the gene gun. Some cells are transformed i.e. they have integrated the gene of interest into their genome.

Engineering the nuclear genome without antibiotic resistance genes:

To limit the presence of unnecessary gene in plant genome, there are several attempts to remove transferred DNA in transgenic plants. One of the way is to use the technique of using Cre-lox site-specific recombination system, which usually involves two steps.

  1. In transforming plants with a plasmid containing the transgene of interest and a resistance gene bordered by two lox sites.
  2. In a transformation with another plasmid containing the Cre gene encoding the recombinase.

Engineering the plastid genome

The advantages of Plastidial DNA transformation technique are-

  • The transfer of the desired genes solely via the female line (in most plant species, the pollen does not contain any plastids), thereby limiting the contamination of wild plants with transgenes carried on by pollen flow.
  • Very high levels of transgene expression in genetically engineered plants (indeed, each plant cell contains many hundreds of plastids).
  • Targeted homologous recombination into the plastid genome.

Plastidial DNA transformation Technique-

Fields of Application:

  1. Controlling plant development and yield. Biotechnology can also play an important part in improving crop yield. The success of current plant biotechnology is based on the hypothesis that resistance to herbicides, insects, and viruses can be obtained by inserting a limited number of genes into cultivated plants.
  2. Improving the tolerance of plants to biotic stresses. Genetically engineered drought- and salt-tolerant plants could provide an avenue to the reclamation of farmlands lost to agriculture because of salinity and a lack of rainfall. Feasibility of improving tolerance of plants to biotic stress by genetic engineering and also genetically adding the hormone- “gibberellin” which help in creation of the plant to tolerate even in bad weather.
  3. The plant as a factory to produce useful molecules. It is also concerned with remodeling components essential to animal and human health (essential amino acids, vitamins), plant metabolism rerouting for biodegradable plastic manufacture, or therapeutic proteins and enzymes.

Conclusion

Until today, there are many potentials that had encouraged the use of plant biotechnology. The transformation and breeding techniques had raised the use of transgenic plants in agriculture. This technology provokes in many reactions also for the future. With the help of this technology, it is possible to modify the plants and overcome the impossibilities. This helps in improving the nutritional value for both humans and animals, also encourage the new product in the industry with better and improved conditions. The modified plants can resist in any temperature, weather or any environment. Moreover, the biochemistry of plants and their genomes are more advanced with more knowledge of understanding.

In my opinion, this technology can improve the quality and many properties of the crops that are more nutritional value. With the transgenic crop, it is also possible to less use of the pesticides and herbicides. For example- “Golden rice” is the best example of transgenic crop.

References

  1. https://www.google.com/search?q=Cre-lox+site-specific+recombination+system,&source=lnms&tbm=isch&sa=X&ved=2ahUKEwj0hLmD2bfoAhVkFjQIHW1VBeEQ_AUoAXoECA0QAw&biw=1366&bih=608#imgrc=LLtg2XxzOGgJeM
  2. https://www.google.com/search?q=plastidial+dna+transformation+technique&source=lnms&tbm=isch&sa=X&ved=2ahUKEwjgotiH-bnoAhWJtJ4KHWKeAtUQ_AUoAnoECA4QBA&biw=1366&bih=608#imgrc=—YoH5HkeyN5M
  3. https://www.google.com/search?q=agrobacterium+tumefaciens&source=lnms&tbm=isch&sa=X&ved=2ahUKEwjDqJbezLfoAhXJ7Z4KHXmJCgYQ_AUoAXoECBwQAw&biw=1366&bih=57#imgrc=P–wSS4PXir-gM
  4. https://www.google.com/search?q=bombardment+gun+particle+bombardment&tbm=isch&hl=en&ved=2ahUKEwjD_K6zhbroAhV4GzQIHcy1CSsQrNwCKAJ6BAgBEDY&biw=1349&bih=608#imgrc=L8APavhxP_TmLM
  5. Job, D. (2002). Plant biotechnology in agriculture. Biochimie, 84(11), 1105–1110. https://doi.org/10.1016/S0300-9084(02)00013-5
  6. Permalink-https://onesearch.library.uwa.edu.au/permalink/61UWA_INST/c6psno/cdi_crossref_primary_10_1016_S0300_9084_02_00013_5
  7. https://www.google.com/search?q=Cre-lox+site-specific+recombination+system,&source=lnms&tbm=isch&sa=X&ved=2ahUKEwj0hLmD2bfoAhVkFjQIHW1VBeEQ_AUoAXoECA0QAw&biw=1366&bih=608#imgrc=LLtg2XxzOGgJeM
  8. https://www.google.com/search?q=Cre-lox+site-specific+recombination+system,&source=lnms&tbm=isch&sa=X&ved=2ahUKEwj0hLmD2bfoAhVkFjQIHW1VBeEQ_AUoAXoECA0QAw&biw=1366&bih=608#imgrc=LLtg2XxzOGgJeM
  9. https://www.google.com/search?q=Cre-lox+site-specific+recombination+system,&source=lnms&tbm=isch&sa=X&ved=2ahUKEwj0hLmD2bfoAhVkFjQIHW1VBeEQ_AUoAXoECA0QAw&biw=1366&bih=608#imgrc=LLtg2XxzOGgJeM
  10. https://www.google.com/search?q=plastidial+dna+transformation+technique&source=lnms&tbm=isch&sa=X&ved=2ahUKEwjgotiH-bnoAhWJtJ4KHWKeAtUQ_AUoAnoECA4QBA&biw=1366&bih=608#imgrc=—YoH5HkeyN5M
  11. https://www.google.com/search?q=plastidial+dna+transformation+technique&source=lnms&tbm=isch&sa=X&ved=2ahUKEwjgotiH-bnoAhWJtJ4KHWKeAtUQ_AUoAnoECA4QBA&biw=1366&bih=608#imgrc=—YoH5HkeyN5M
  12. https://www.google.com/search?q=plastidial+dna+transformation+technique&source=lnms&tbm=isch&sa=X&ved=2ahUKEwjgotiH-bnoAhWJtJ4KHWKeAtUQ_AUoAnoECA4QBA&biw=1366&bih=608#imgrc=—YoH5HkeyN5M
  13. https://www.google.com/search?q=agrobacterium+tumefaciens&source=lnms&tbm=isch&sa=X&ved=2ahUKEwjDqJbezLfoAhXJ7Z4KHXmJCgYQ_AUoAXoECBwQAw&biw=1366&bih=657#imgrc=P–wSS4PXir-gM
  14. https://www.google.com/search?q=agrobacterium+tumefaciens&source=lnms&tbm=isch&sa=X&ved=2ahUKEwjDqJbezLfoAhXJ7Z4KHXmJCgYQ_AUoAXoECBwQAw&biw=1366&bih=657#imgrc=P–wSS4PXir-gM
  15. https://www.google.com/search?q=agrobacterium+tumefaciens&source=lnms&tbm=isch&sa=X&ved=2ahUKEwjDqJbezLfoAhXJ7Z4KHXmJCgYQ_AUoAXoECBwQAw&biw=1366&bih=657#imgrc=P–wSS4PXir-gM
  16. https://www.google.com/search?q=bombardment+gun+particle+bombardment&tbm=isch&hl=en&ved=2ahUKEwjD_K6zhbroAhV4GzQIHcy1CSsQrNwCKAJ6BAgBEDY&biw=1349&bih=608#imgrc=L8APavhxP_TmLM
  17. https://www.google.com/search?q=bombardment+gun+particle+bombardment&tbm=isch&hl=en&ved=2ahUKEwjD_K6zhbroAhV4GzQIHcy1CSsQrNwCKAJ6BAgBEDY&biw=1349&bih=608#imgrc=L8APavhxP_TmLM
  18. https://www.google.com/search?q=bombardment+gun+particle+bombardment&tbm=isch&hl=en&ved=2ahUKEwjD_K6zhbroAhV4GzQIHcy1CSsQrNwCKAJ6BAgBEDY&biw=1349&bih=608#imgrc=L8APavhxP_TmLM
  19. https://doi.org/10.1016/S0300-9084(02)00013-5
  20. https://doi.org/10.1016/S0300-9084(02)00013-5
  21. https://onesearch.library.uwa.edu.au/permalink/61UWA_INST/c6psno/cdi_crossref_primary_10_1016_S0300_9084_02_00013_5
  22. https://onesearch.library.uwa.edu.au/permalink/61UWA_INST/c6psno/cdi_crossref_primary_10_1016_S0300_9084_02_00013_5

Climate Change, Sahel Savanna, Gum Arabic And Biotechnology

Climate change has assumed global concern such that several aspects of the Sustainable Development Goals (SDGs) of the United Nations are relevant to climate change. Some of the climate change related aspects of the SDGs are SDG 7 (Affordable and clean energy), SDG 13 (Climate action), SDG 14 (Life below water) and SDG 15 (Life on land). Within the context of these four aspects of the SDGs, Climate Action, Life below Water and Life on Land are within the scope of agriculture. These three areas also form significant part of climate smart agriculture advocated by the FAO (FAO, 2013).

In tackling the issues of climate change, the developing countries also characterized by low technology agriculture are considered vulnerable communities as their poor ability to adapt to changing weather conditions will be a major set-back to the global effort of adaption and mitigation of climate change. This will lead to serious humanitarian crises and high profile crimes, which is predicted, in a World Bank report, to attain severe levels by 2050 (Rigaud et al, 2018). In the World Bank report, it was advised that government and funding agencies will need to focus on sustainable economic empowerment of the vulnerable communities as a preemptive measure to guide against migration and attendant social dislocation which is already witnessed especially in Africa (Omokhafe, 2017; Cabot, 2017).

The Sahel Savanna was till the 1950s restricted to the extreme North Eastern Nigeria. It gradually manifested at the northern extremes of the North Central and North West zones, but today the Sahel Savanna has occupied the entire northern part of Nigeria. This scenario is not different across the West African sudano-sahelian zone. This downward extension of the Sahel means loss of fertile land, loss of fodder, reduced crop and animal production. It is believed strongly that the farmer-herder clash is attributable to loss of fodder and hence the survival instinct to make use of what is available sometimes at the expense of the livelihood of others (Olaniyan et al, 2015).

Some challenges are as follows: the southward trend of increased aridity associated with the increasing Sahel Savanna in Nigeria. The requirement of increased vegetation cover of the Sudano-Sahelian zone for sustainable food, fodder, environment and profit for the communities. Gum arabic (Acacia senegal) is an arid zone crop that can meet these multiple requirements (Omokhafe et al, 2019). The application of biotechnology is necessary to meet the target of gum arabic tree based climate action agroforestry. The objective of this paper therefore was to present the climate smart relevance of gum arabic and the application of biotechnology to enhance the production and productivity of gum arabic as an ecofriendly crop.

Gum arabic (Acacia senegal)

Gum arabic has the following advantages:

  1. Evergreen tree of the sahel. It is green almost throughout the year providing forage for cattle, sheep and goats even during the dry season.
  2. Source of foreign exchange: several countries with Sudan as typical case, derive their foreign exchange mainly from export of gum arabic.
  3. Source of income: gum arabic is sometimes referred to desert gold as it an article of merchandise from farm-gate sale, through sorting/grading and sale by middlemen to international trade. It is a rich value chain.
  4. Food value: it is a component of processed foods, confectionary and a number of canned/bottled drinks.
  5. Medicinal value: as binder in many drugs.
  6. Source of carbon sink: it is believed that the emergence of trees on the geologic time scale has been a stabilizing factor in the concentration of atmospheric carbon. Marzocchi (2015), Omokhafe et al. (2019) reported that in an era on the geologic time scale, trees effectively reduced atmospheric carbon from 650ppm (v/v) to 100ppm (v/v). Gum arabic tree has the potential to reduce atmospheric carbon as suitable carbon sink. In recognition of the stable sinks provided by trees, Farglone et al (2018) suggested land use allocation of grassland such that after making provision for urbanization, crop/livestock production and fodder, the balance will be planted to trees. In this regard, tree crop agroforestry was advocated, especially in developing countries to take advantage of tree culture and economic empowerment of resource-poor, low technology communities (Mangala and Makoto, 2016).

Biotechnology application in gum arabic

In view of the ecofriendly advantage of gum arabic, biotechnology can be used to improve the production and productivity of gum arabic as follows:

  • Micropropagation: gum arabic is a tree crop producing seeds only once a year. This places restriction of the use of seeds for propagation. Micropropagation can enhance multiplication.
  • iMultiplication of improved varieties: since the 1990s, new genetic materials of gum arabic are available rather than collection of unselected seeds from the wild. These improved materials require multiplication through tissue culture for faithful multiplication of improved genetic materials.
  • Molecular techniques for variety identification: this is necessary for identification of selected genotypes and to accelerate genetic improvement.

Suggested steps

  • Collaboration among government agencies to pull resources together
  • Collaboration between government and non-governmental organisations in furtherance of private public participation.
  • Collaboration between NGOs/private sector including local and external/international donor agencies

In this regard, government at various levels is expected to make a mark in climate action. Climate restoration agencies may mobilise funds to support investment in tree crop based agroforestry for multiple benefits of economic empowerment of resource-poor farmers (SDG 1), improved nutrition through agroforestry (SDG 2), carbon sequestration (SDG 13), enhancement and conservation of biodiversity (SDG 15) under the Sustainable Development Goals of the UN (UNDP, 2016). Suitable proposals are necessary to attract support of government or donor agencies.

In conclusion, there are prospects of the use of gum arabic tree based agroforestry to respond to the challenges of climate change. This is necessary to avert humanitarian crises in low technology countries, as forecasted in a World Bank report. In this regard, gum arabic based climate smart agriculture is recommended. This will be facilitated by gum arabic biotechnology.

Applications Of Animal And Plant Biotechnology In Food Industry

Food science is defined as the study of the physical, biological and chemical of food, which most of the studies related to food processing and food deterioration while food technology is the application of it involved in packaging, preservation and food safety (Institute of Fodd Technologies, 2019). The fields that closely related to the food technology are such as biotechnology, engineering, nutrition and quality and safety management. In this review, biotechnology will be discussed on its roles and applications towards food industry.

Biotechnology is the scientific techniques used to produce new and specific desired traits or characteristics in various organisms such as plants, animals or microorganisms through genetic study. In food production, food biotechnology has been widely used to create another alternative in improving food productivity, safety and quality. Food biotechnology has been widely used by people around the world because from the technology, they can develop new species or a hybrid product that exhibit better characteristics than the original food.

In this review, it will be discussed regarding the animal and plant biotechnology in food industry. Animal biotechnology is where genes of the organisms are being modified to improve the characteristics to be used in various fields such as in pharmaceuticals, agricultural, industrial and food applications (About Bioscience, n.d). Plant biotechnology or crop biotechnology is the one that developing new varieties and traits in plants and crops using genetics and genomics, marker-assisted selection (MAS) and transgenic or genetic engineered crops. This allowed the researchers to select specific genes for improving the crops and products (National Institute of Food and Agriculture, n.d). Genomics is where genetic information is being used to improve livestock selection and breeding, determine optimum nutrition needed and producing high-quality products (International Food Information Council Foundation, n.d).

Animal biotechnology has been continuously used in order to get a genetically modifies animals that can synthesize therapeutic protein, improving the rate of growth and prevent disease or virus against the animals (About Bioscience, n.d). In animal biotechnology, it has been gone through many advanced progress such as in gene sequencing, gene expression and metabolic profiling. The examples of animal biotechnology are gene cloning and genetic engineering. In plant biotechnology, the importance of biotechnology in a crop is to provide a plants that are sustainable to any environmental situations, can produce a good fruits or vegetables that have the best traits and characteristics and increase the shelf life.

Cloning is one of the earliest and well-known technologies used in animal. Cloning helps in producing and increasing the number of good and high-quality livestock. The most suitable animal is being cloned to produce identical twins and further breed to get the other generations without changing any of the genetic materials of the animals itself. In 1996, the famous clone animal, which is a sheep named Dolly as shown in Figure 1 was the one that remarks the cloning technology now. However, Dolly was not the first clone animal where the first clone animal was in 1984 followed by two other sheep in 1995 (The Life of Dolly, n.d). The success in Dolly’s cloning was because of it had been cloned from an adult meanwhile the earlier cloning had been done using embryonic cells. It is considered to be the most successful cloning that had been done during that time. Nowadays, cattle, goats, horses, mules and rats also have undergone cloning.

Other from cloning, genetic engineering also one of the biotechnologies that have been widely used. Genetic engineering is considered to be the most recombinant DNA technology that involves in insertion of foreign genes into plasmids of bacteria (Rosenberg, 2017). It also capable in direct protein synthesis, which could help scientist and researchers to undergo wide researches where commonly used in plants and livestock. It can be established by using multiple techniques, where nowadays advanced technologies have been widely used to improve the genetic engineering process. Traditionally, the technique involve the insertion of genes at random sequence in the host’s genome, however by having advanced technologies, the genes can be inserted at specific locations.

In food industry, animal and plant biotechnology as mentioned beforehand is important because of some occurring issues. The continuous demand from consumers on high-quality raw materials used in their meals has been one of the issues. This is because, the best product could be from other countries, which is hard to be obtained and involving high cost for the purchasing procedures. Besides, to fulfill the requirements to give healthy, nutritious and longer shelf-life foods in the market, which make the animal biotechnology is important. This can be seen in the Food & Health Survey in 2018 conducted by International Food Information Council Foundation, it shows that 80% of people aware on the healthy foods (Figure 2). The biotechnology techniques allowed all of these requirements to be fulfilled.

The problems in the food industries can be resolved which in animal and plant biotechnology, they had been developed transgenic techniques by introducing foreign deoxyribonucleic acid (DNA) into host organism. The foreign DNA is the gene that holds the desired characteristics for the host organisms to exhibit new characteristics compared to the original organisms. This is also called as genetic engineering mentioned beforehand and the products will be called as genetic modified organisms (GMO). The procedures on how the genetic engineering being carried are varied and depends on the scientists and researchers themselves. However, the general steps in carrying out genetic engineering are shown in the flow chart below.

The technique started with identifying the target gene (Rosenberg, 2017) to be inserted to the host organism. The genetic screens will be carried out to determine the potential genes that suitable for the desired purpose. This genetic screening is being done by randomly mutated DNA with chemicals or radiation. Then, the DNA that display desired trait will be chosen. Besides genetic screening, it can be identified using forward and reverse genetics. Forward genetic involves phenotype being marked and then compared the inheritance of phenotype with known genetic markers. As for reverse genetic, the gene is mutated and then being observed on the development of phenotype.

Next, after targeting the gene, gene manipulation or modification of DNA (Rosenberg, 2017) is being carried out. The modification first started with gene extraction, where the DNA is separated from cellular components. Then the gene of interest is separated from the extracted DNA by using random digestion method or restriction enzymes. Then modification of gene is where the isolated gene needs to be combined with other genetic elements for it to work properly which usually by using recombinant DNA techniques such as restriction digests, ligations and molecular cloning,

Then, after modification, the gene or extra chromosomal DNA need to be stable to incorporate into the target organisms. There are many techniques on how to insert the DNA, which depends on the type of organisms targeted. The techniques frequently used are firstly transformation which is a direct alter on the genetic components by passing through the genet through cell membrane. Next, transfection is the process where being used when using animals as the host where the foreign DNA is inserted by using gene therapy. Then, transduction is when the foreign DNA is being introduced using viral vector to help in transfer the genes to another organism. Lastly, regeneration or commonly known as tissue culture also one of the most used techniques in gene insertion into an organisms.

Lastly, gene targeting where in this stage the gene is specifically targeted at specific sites within the organism’s genome. Nowadays, the scientists and researchers used genome editing which are an artificial engineered nucleases that create specific double stranded breaks at desired location, which then the new genetic can be integrated into the site. Most common engineered nucleases are meganucleases, ZFNs, transcription activator-like effector nucleases (TALEN) and clustered regularly interspaced short palindromic repeat (CRISPR) (Rosenberg, 2017).

The roles of food biotechnology are very important in all food industry such as in food processing and food safety. The other applications on the technology in food processing are the production of enzymes. The used of enzymes have been applied in food processing such as in making bread and bakery products. The production of enzyme mainly comes from microorganisms. In example, the rapid-rise yeast and cheese that are available in the market is one of the products that being produced through biotechnology. Besides, enzymes such as protease also has been widely used as meat tenderizer and in most dairy products, chymosin has been used in cheese production because it can coagulate milk and in baking process, alpha-amylase has been used to give sweetness to the food products by converts the starch to maltose (Snehal & Dubey, 2019). Table 1 below shows the examples of some enzymes obtained from genetically modified microorganisms (Olempska-Beer, 2006).

The food biotechnology also helps in improving the raw materials production and enhances taste and flavours which mostly, scientists have been used food technology in fruits and vegetables to improve the taste and increase shelf life (Snehal & Dubey, 2019). Vegetables and fruits once they have ripened and matured, they are easily undergoing degradation process even in a day. This is where food biotechnology plays its role to ensure that these food products can have a longer shelf life. This is important because when involved with product shipping that could take months, it can benefit the producer and also consumer to ensure that the food products maintain their characteristics, taste and physical appearance upon arriving to consumer. This can be seen as shown in Figure 4 below, where the difference in the appearance of the tomatoes after several days being stored, with and without biotechnology is being applied.

In conclusion, the food biotechnology, which animal and plant biotechnology has been the wide contributor in fulfill the global demand on healthy, nutritional and best food products. The great advantages in food biotechnology also one of the reasons on why it is chosen as the alternative to solve the demands from consumers. Biotechnology can protect the environment from usage of harmful herbicides or pesticides on plants especially. Researchers have made some foods such as papayas and potatoes resisted to disease which makes the crop does not use any pesticides or chemical that is harmful to humans and the environment. This biotechnology technique also has made a greater crop yields and organism that have the best characteristics. In plant, tomatoes which had undergone some genetically modified to make them ripen slowly which can ensure the freshness of the products and in animal, by injecting the best gene that give good taste and texture for its meats or milk into another cow that had already exhibit good characteristics, will make the product become much better. The disadvantages is when there are some disagreements from people on the terms of use other genes into other organisms, which some of them say that it is disrespect behaviour towards the animals and plants. Besides, the genetic modified might lead to a worse condition on the organisms or crops because of unsuccessful gene insertion or unsuitable host and conditions. This will make the organisms or products become harmful to humans or consumers as well as to the environment.

In Islam, there is no clear guidelines according to genetic modified technology, however there is stated that for humans they are not allow to change our physical appearance, gender or anything unless for health purposes and with a valid reasons. Some scholars also have a debatable on its rules regarding these advanced technologies. Some also have supported that because of the good benefits and advantaged that the technologies give for humans, animals and the environment, it is acceptable as long as no haram ingredients are being used and comply with Islamic guidelines in all aspects.

Plant Biotechnology: Selection And Regeneration Of Transformed Plants

After bombardment, the somatic embryos of the papaya (Carica papaya) will be selected on medium containing 150 g mL−1 kanamycin monosulfate for 3 months. According to Drew and Smith(1986), germination of the papaya then will be induced on a modified de Fossard medium (de Fossard et al., 1974) and will be supplemented with 25 g mL−1 kanamycin. Single plantlets will then transferred into vessels containing the same medium without kanamycin. In the culture medium, high concentration of minerals and hormones will be added to improve shoot growth and quality as well as to enhance the growth of the callus. 1 μ mol l−1 of NAA and BAP will be added to the modified Fossard medium which will induce shoot growth and cause excessive callus production. Both plantlets, with and without kanamycin, then will be clonally multiplied in tissue culture using the method described by Drew (1988). He stated that the cultures will be created from buds of 3- month old papaya plants, followed by enhancement of axillary shoot growth on Drew and Smith (DS) medium containing 1 mM BAP + 0.25mM NAA. After that, stem apices will be removed from mature field-grown papaya (Carica papaya L.) and the area of cut will be applied with mixture that contains 225 mg BAP/liter of lanolin. Thus, will promote rapid development of axillary branches on rooted cuttings. Small axillary buds will be removed from these branches and cultured on solid medium, and then in liquid medium on a roller drum at 3 rpm in Drew and Smith (DS) medium containing 1 mM BAP+ 1 mM NAA. After two or three subcultures on the roller drum with alternate periods on hormone-free basal medium, apically dominant shoots were produced. Roots will be initiated through incubation process at 27°C in a 12-hr photoperiod on a reduced mineral medium containing 10 mM IBA.

Genomic DNA was extracted from papaya leaf tissue of the regenerated papaya plants as described by Lassner et al. (1989). Plantlets that regenerated on kanamycin will be analysed by PCR method. An 864 bp fragment of the coat protein coding region will be amplified from approximately 1 g of genomic DNA in a standard PCR reaction using Taq polymerase and includes 30 moles of each primer, MB11 and MB12 (Bateson et al. 1994). The primers MB13 (GGGAGTGAGGAATGATTATGGCC) and MB12 will be used to amplify partial fragment of the coat protein coding region.. PCR amplification conditions include an initial denaturation cycle of 5mins at 94 °C followed by 35 cycles of denaturation for 30s at 94 °C, annealing for 30s at 55 °C and extension for 30s at 72 °C, with a final extension of 10 mins at 72 °C. Following PCR, southern hybridisation will be applied to define transgene copy number in selected lines. Restriction enzymes will then selected that either cut once in the transformation vector p2KCP9 (HindIII), to estimate the number of integrated copies of the transgene, or did not cut at all in the transformation vector (BglII), to estimate the number of different integration sites. Genomic DNA (10 g) will then digested with HindIII or BglII and electrophoresed on a 0.8% agarose gel. DNA will be immobilised on Hybond N nylon membrane (Boehringer Mannheim) after capillary transfer (Southern 1975) in 20 × SSC. Digoxigenin (DIG) labelled probes, homologous to the PRSV-P coat protein (CP) coding region from the plasmid p2KCP9 were made using primers MB11 and MB12 and incorporating DIG-labelled dNTPs (17:1) (Boehringer Mannheim). Approximately 5 g of the probe will be used for hybridisation to the membrane. The DIG label will be detected using the chemiluminescent substrate CDP Star according to the manufacturer (Boehringer Mannheim).

Total RNA will extracted from both inoculated and non-inoculated papaya leaves using a modification of the method by Glisin et al. (1974). 2 g of the tissue will be grounded in liquid nitrogen and extracted with 25 mL of RNA extraction buffer (25 mM trisodium citrate pH 7, containing guanidinium isothiocyanate (50% w/v), 1.2% n-lauryl sarcosine, and 0.7% mercaptoethanol). Following centrifugation (2,000 × g, 10 min), the supernatant will then filtered through miracloth and layered over 6.18 mL of 5.7 M cesium chloride containing 0.1 M EDTA. Samples will undergo centrifugation for 18 hours at 68,566 × g in a Beckman SW28 rotor. RNA pellets will resuspended in 200 L DEPC-treated water, clarified by low speed centrifugation and ethanol precipitated. RNA was resuspended in a final volume of 20 L DEPC-treated water. For northern hybridisation, 20 g total RNA, determined by UV spectrophotometry will be electrophoresed on an 8% formaldehyde denaturing gel (Sambrook et al. 1989). The RNA will then transferred to Hybond N nylon membrane using capillary transfer and the membrane will be hybridised with DIG-labelled coat protein fragment probe.

Total protein will be extracted from transgenic papaya plants using commercially available protease inhibitor tablets according to the manufacturer’s instructions and 15 g of protein will be western blotted onto nitrocellulose membrane according to Sambrook et al. (1989). Detection of the PRSV coat protein will be attempted using PRSV specific antisera (Bateson 1995). Swine anti-rabbit IgG conjugated to horseradish peroxidase (HRP)(DAKO) will be used as the secondary antibody. For HRP, Lumi-Light Plus Western Blotting Substrate (Boehringer Mannheim) will be used as the substrate.

Regenerated plantlets also acclimatised to the glass-house. As described by Drew (1988), shoots will be established in a high-humidity (> 90%) cabinet in a glasshouse and planted in the field. Acclimatised plants will be grown under glasshouse conditions for 2 months before mechanical inoculation with PRSV-P.

The mechanical inoculation process involve grounding of the leaves from PRSV-P infected-field grown papaya in 0.1 M potassium phosphate buffer pH 7.0. Transgenic plants and non-transgenic controls will be dusted with carborundum. Also, the youngest two fully expanded leaves of each plant will be rub with phosphate buffer or papaya sap mixture. This inoculation process will be repeated 1 week and 3 weeks after the initial inoculation.

References

  1. Bateson M.F., Henderson J., Chaleeprom W., Gibbs A.J. and Dale J.L. 1994. Papaya ringspot potyvirus isolate variability and the origin of PRSV type P (Australia). J. Gen. Virol. 75: 3547–3553.
  2. Bateson M.F. 1995. Developing transgenic resistance for potyviruses. PhD Dissertation, Queensland University of Technology. de Fossard R.R., Myint A. and Lee E.C.M. 1974. A broad spectrum tissue culture experiment with tobacco (Nicotianatabacum) pith tissue callus. Physiol Plantarum 30: 125–130.
  3. Drew R.A. and Smith N.G. 1986. Growth of apical and lateral buds of papaya (Carica papaya L.) as affected by nutritional and hormonal factors. J. Hort. Sci. 61: 535–543.
  4. Drew R.A. 1988. Rapid clonal propagation of papaya in vitro from mature field-grown trees. HortScience 23: 609–611.
  5. Lassner M.W., Peterson P. and Yoder J.I. 1989. Simultaneous amplification of multiple DNA fragments by polymerase chain reaction in the analysis of transgenic plants and their progeny. Plant Mol. Biol. Rep. 7: 116–128.
  6. Sambrook J., Fritsch E.F. and Maniatis T. 1989. Molecular Cloning: A Laboratory Manual. Cold Spring Harbour Laboratory,Cold Spring Harbour, New York.

Biotechnology Regulatory, Safety And Ethics

ABSTRACT

Biotechnology consists of various techniques that helps in improving and providing better life to human beings. Biotechnology has provided several biomedical tools and techniques, to diagnose and cure diseases. Even biotechnology set a new parameters in industrial, agricultural, and biomedical fields. With the help of biotechnology several new enzymes, antibodies and vaccines are founded, which have promised less expensive products and cost effective treatments for many hazardous diseases by replacing highly expensive treatments and drugs. Along with it biotechnology has improved agriculture on large scale like it has gifted us plants with improved immunity, nutritional value and high yield which in either ways is benifical for humans. But recent incline in the development and use of genetically modified products resulted in debate in all over the world. As each coin has two faces similliar in the case of biotechnological products, even it has a negative aspects. It is difficult to predict difficulties, benefits, risks and ethics related to biotechnological products, along with few regulatory aspects. Changes and technological revolutions are important because they bring required changes to the world, it just requries careful consideration of safety, and ethics related to new products because with it we can reduce risks and ethics in future. And ethical considration is also important because in some cases biotechnological products may ended with some unanticipated results which may be criticized by several groups of society and even by few scientists. In present we have several examples of products and biotechnological techniques that have had faced criticism, like BT crops, GM organisms and few food industrial products due to their negative impacts on living organism were criticised and even were banned to use. That’s why ethical examine of biotechnological products is important before using and launching them in market, because by not doing so we can risk several lifes, our futur generation and even we can put our planet in danger. It is medatory to analyse potential and benefits of biotechnological products, along with its drawbacks and ethical issues.

INTRODUCTION

Biotechnology has a wide range of definitions, however; the term “biotechnology” is about using biological systems, organisms, plants, and techniques for the benefits of people. While biotechnology is bounded to scientific, and technological knowledge, some where it also shares boundaries with ethics. The enhancement and regulation of biotechnology has given birth to several discussions from different sectors, as law, political, religious, economic and social. Biotechnology has diverse roles to play in various sectors, as biotechnology is included in formation of curd, beer and vine fermentation, formation of natural cooking gas by bacteria, bread and even pizza formation. Advancement in biotechnology has uplifted industrial and agricultural sectors on huge parameters with the help of special techniques Recombinant DNA, gene therapy, enzyme engineering, stem cell and cloning. These techniques have accelerated scientific research, it is mainly a breeding techniques which have been used in genetic engineering of living cells, animals, plants and human being from past few decades, which have tiggered the ethical issues and concerns in the creation of genetically modified organism as tomatoes, soya, wheat, and rice, animal cloning as transgenic cows, horses and sheep (dolly) and most importantly human embryo cloning have been facing ethics.

Some masses have view that by doing so we are challenging or nature. However, by RDNA hundreds of vaccines, drugs, enzymes and proteins are formed un-naturally, as insulin, vaccine for malaria and polio are few example of RDNA technology. Most importantly biotechnology has changed the vision towards agriculture by giving us GM organisms and plants, as BT cotton, BT wheat, BT rice, sugarcane and many other are good examples of revolution in green biotechnology.BT crops have high yield, they are drought resistance, pest and herbicide tolerance, and even they have more nutritional values than un-modified crops. In 1996 first genetically modified crop was introduced in US market and even was adopted by farmers on larger scale and as a result great success was achieved by increased yield and many other desirable characters. In-spite, of all it, biotechnology has been a burning topic of debate since from its beginning in early 1970s for its safety and ethics. However, ethics are as important as its positive outcomes and benefits because, introducing these in environment may lead to un-stability, safety risks, ethical aspect. So, for the safety purpose these crops have a specific selection procedure. Ethical and safety concern was firstly mentioned by a molecular biologists on certain research to the Asilomar Conference in 1974, in a scientific gathering by United States governments. As a results, of this conference, guidelines for RDNA were made and published by National Institutes of health ( NIH) Recombinant DNA Adviosry Committee (RAC), to provide guideline how the experiments should be conducted to hinder unpredicted products from genetically modification experiments or organisms. It is important to consider these rules for safety and ethics, because at some stages the role of ethics may not be visible.

The main aim of this report is to provide some vision to ethical concerns, safety and regulations in biotechnology. This report focuses on agriculture. Basically, ethics involve consideration on merits and demerits of any application and technology and their effect to environment, existing species, organisms and most importantly on humans, along with it economic, social and religious disputes with the development of technology are also considered by ethics and safety. It is important to understand difference between ethics, law and moral values. We cannot replace ethics with morality. As in India 2001, the unauthorized cultivation of BT cotton was unethical, as well as illegal. In one of the article by the New York Times, it was reveled that several European countries have either adopted GMO crops or either they are deciding in future. However, it was reported by US General Accounting Office that U.S. facing restrictions in GM crop market ( Environmental News Network, June 27, 2001). Even genetically modified crops have to face criticism, even than from mid-1990s, a rapid adoption of 4 major crops were reported, corn, soybean, canola and cotton in several countries, US is one of them with significant interest in bio engineered crops. Furthermore, these crops were opposed by some of the Non-governmental organizations ( NGOs ) such as Friends of earth, Greenpeace and many more, in the pressure from these companies genetically engineered products were banned and removed from US market, as Gerber ( baby food ),Frito Lay ( snacks ), IAMs ( pet food ) and many more. After that few bills were introduced by Congress, into the US House of Representative and Senate ( Boxer, S. 2080 ), in which it was compulsory to label if food contain GMOs. In US a brand named Taco Bell used a variety of BT corn, which was not yet approved for human use in the US Environmental Protection Agency (EPA ). It was issue of debate because this crop has allergic concerns and this crop was called off by the US from retailers and the countries where it was exported. From thousand of reports and studies by several bodies, risks of dealing with genetic crops and their ethical issues regarding with health/ environment, some of them are as, many of the surveys mentioned that GMOs have toxic elements and harmful proteins which causes allergies and reducing human immunity and even causing cancer.

Secondly they have detrimental effects of non modified crop species and environment. For instance, Ice-minus (Pseudomonas syringae ) is pathogenic bacteria present in plants, which is used in many researches. And made a bacterial solution for spraying, according to the ethics release of pathogenic bacteria in environment is unjustifiable, its release could risk human health, they argue that it could imbalance the ecological cycle. We have great risk for the loss of biodiversity because GM crops are likely to threat to existing species by outgrowing or eliminating local/native flora, followed by several other issues, such as spread of herbicide tolerance from GMOs to non-modified crops and weed species, and most importantly human pathogens may become resistant to several medicines, vaccines, drugs and antibiotics, which may end in worst condition for health sector. We can not ignore the risk and future impact of biotechnology on mankind. To avoid future problems related to genetically modified organism and plants government bodies and scientists made few rules for the selections of GMOs with the help of selectable and non- selectable markers to reduce detrimental impacts. There are even rules for the safety of customer and consumers, NGOs and other human rights advocates says, that consumer have right to know, whether the food they are buying and using is genetically modified or not, and if it is then what may be the consequences of using bio-engineered food. For example, in 1996, a protein from Brazil nut have been introducing into canola and soybeans. Allergic reactions were reported by FDA and as a resultant product was banned in 1999 from further development and human use. Most importantly, these all procedure of genetic engineering requires huge amount of funds and time, this is one of the reason, why few economist criticize biotechnological products.

ETHICAL CONSIDERATION IN AGRICULTURAL BIOTECHNOLOGY

This report is about ethics issues and safety in agricultural field, especially genetically modified crops. There is a broad range of concerns, because when a biotechnological crop is out in the nature it may impact the soil where it is grown, native ecology, humans who are in contact with these crops either they consume it, they wear the clothes made from it, or either they inhale the pollens of these crops in any way, BT crops may show their consequences in future generation. Some of potential issues involved in cultivation and use of GM crops:

Presence of harmful and allergenic proteins in food

There are several examples of genetically modified crops which showen allergies to the consumer. It may be the result of overproduction of some of innate compounds which are resulting in high level of toxic substance in transgenic products. Several experiments and tests are required to control the production of toxic level in GM crops which are not required for human diet. For instance, clothes made from BT cotton have allergic reactions and rashes to users. In general, genes in parental plant are not allergic but when they are used in transgenic plants, they become highly allergenic. In 1996 CP4 EPSPS enzyme was used in soyabean for herbicide tolerance but this toxic enzymes does not shows any impact on human being because this enzyme get digested rapidly and ending with out harm or allergy. Soil changes due to BT crops were also reported, crop remaining are the source of carbon and other toxic elements in the soil which are responsible for changes in microbial modifications in soil. Cry protein produced by one of the BT crop have negative effects on wwodlice, earthworms, mites, protozoa and many other soil species. These crops are responsible for changes in geography, temperature,soil type and variety of native plants.

There are several rule and techniques to reduce these ethical issues and insure safety of users of BT crops. These crops are even reason of modifications in humans. Kanamycin a marker gene inactivates the antibiotics but we don’t have any definitexample of it in human but due to the public concern Kanamycin use was probihited. Some of govermental and non-governmental bodies ensure that GM crops we are giong to use are not allergic, Word Health Organisation (WHO) and Food and Agricultural Organisation (FAO ) made a procedure to check allergic impavt of GM crops.

Impact on environment and native species

Genetically modified crops that are insectide or herbicide resistant to check the rate of agricultural pets and weeds, also have detrimental effect on native or existing crops and oranisms. These crops even harms or kills the non-pests. Which result in ecological shift and even most of pests develop immunity against these crops. For instance, a lacewing larva which fed on a vareity of transgenic corn ( Cry 1 Ab ) was reported with inclined rate of mortality in comparisn to the larva feeding on non-modified corn crop. Some of weeds when they come in contact with BT crops develop mutation in them and cover large area. Pollen drift from these crops causes problem they contaminates non- modified crops.

Incline in weediness of crop plant

It is one of the debate topic, but it is some where right, that release of GM crops in enviroment may cause agricultural weeds and farmers may have to face huge problem in checkin and controlling this agricultural weeds. Crops which have weed like characters, when they are genetically modified and transformed into GM crop may invase and grow on such a large scale like weeds. For example, crops like Oryzae, Brassica napus, Mendicago sative have weed like characters, and their weed like growth may be controled by using some mixture of ingredients.

Pests resistance

Cultivation and use of BT crops with pests and disease resistance on such a large scale have been resulting in resistance of pests againts chemicals. The target pests Helicoverpa armigera and Helicoverpa zea are less affected by Cry 1Ab and Cry 1Ac in BT corn and cotton. These pests are evolving by mutation in them becoming nearly resistant to these genes. In addition, the diomand black moth is a pest of Brassica crop in all over the world. It was the first pests reported with resistance to BT toxins, used to check their growth rate. So resistance to pathogenic protein by pests will arise problems in coming future of transgenic crop.

Effects on Biodiversity

Intance use of genetically modified crops is resulting in biodiversity decline. Pollens from GM crops can contaminate other non- GM crops and as a result local and native varieties will disappear from planet. In Mexico farmers are not allowed to grow genetically modified maize crop but, however; Mexican import maize on large scale for using them in food. That’s why in a study, 870 maize plants in 125 fields is 18 different locations were studied and not in a single seed out of 153,746 have had genetically modified DNA. Use of convential soy is replaced by GM soy crop which is glyphosphate –tolerant and it is harmful for environment.In Argentina and the United States a glyphosphate weed was appered because in these countries the use of glyphosphate- tolerant soy was very common. As a result, cultivation of genetically modified soy dropped in Argentina from 21% in 2004 to 1% only in 2013.

  • To handle the problems related to use of genetically transformed crops two basic safety concerns are :
  • To tackle the problem of DNA transfer by pollen and seed, male sertile plants can be used because they don’t produce pollens. And by this way pollen shift can be reduced and may also hinder seed dispersal.
  • To avoid the entry of pathogenic molecules in food chain by using non food crops in as GM crops, like tobacco. Or use of fluorescent markers to moniter expression of linked genes.

Regulation and Public concern: GM crops

Genetically modified crops have been facing problems for commercilization along with the market restrictions. Despite of the benefits of this new technique there is a pressure on regulation and legislation of GM crops. For good use of GM crops or animals, adequate biosafetysystem along with proper guidelines, appropriate review, feed back from farmers and consumers are required. Many cuntries have made a regulatory system to ensure effective and safe evolution of GM crops. Mnay are working to make a proper legislative frame for environmental and commercial release of transgenic crops, because genetically modified crops may raise social, religious, ethical, political, economic, scientific and technological. FDA announced that labelin of transgenic products or food is must, by doing so public will able to identify between genetically modified and non- modified stuff and it would we their choice to use either of them. By proper labeling public will come to know about the compositions of products and the allergies or other reaction from these genetically modified products. By labelling people will have information about risks and benefits of using them with truthful knowledge, and non mislesding information.

Conclusion

From several decades b iotechnology has been used as a technique or a tool to benefit mankind by producing new characters in agricultural plants and aminals. Revolusion in technology have gifted us new techniques for the formation of transgenic crop, genetically modified plants, vaccines, drugs, and many other products. Public have diverse opinion related to genetically modified crops, it was desined to improve agricultural, industrial, and medicinal sectors. Main bojective of GM crops to benefit framers with high yield, cost effective framing and crops with good self lifes. However, other masses share view about the safety of GM crops. It have been made compulsery to label GM products to make it seperat from non- modified crops, to ensure safety and ethics related to it,because these GM crops may contain allergen and differnet composition or nutritional contants, which may result in allergies or some adverse reaction to the consumers. By advanced regulation system we can reduce risks and ethics related to biotechnology. To conclude, proper assesment of all aspect of genetically modified crops and its effects on present and future generation can benefit living organisms.

References

  1. Ahmed FE (2002) Detection of genetically modified organism in food. Trends Biotechnol 20:215-223.
  2. Anklem E, Gadani F, Heinze P, Pijnenburg H, Europe, PM (2002) Analytical methods for detection and determination of genetically modified organisms in agricultural crops and plants-derived food products. Eur Food Res Technol 214:3-26
  3. Betz FS, Hammond BG, Fuchs RL (2000) Safety and advantages of Bacillus thuringiensis- protected plants to control insect pests. Regul Toxicol Pharmacol 32: 156-173.
  4. Comstock, G. 1998 Is unnatural to genetically engineer plants? Weed Science 46:647-651.
  5. Carr, S. and Levidow, L 2000. Exploringthe links Between Science, Risk, Uncertainty, and Ethics in Regulatory Controversies about Genetically Modified crops, Journal o Agricultural and Environment Ethics 12: 29-39.
  6. Food and Drug Administration, (May, 29, 1992), “Statement of Policy: Foods Derived From New Plant Varieties,” Federal Register, 57 FR 22984