Do you need this or any other assignment done for you from scratch?
We have qualified writers to help you.
We assure you a quality paper that is 100% free from plagiarism and AI.
You can choose either format of your choice ( Apa, Mla, Havard, Chicago, or any other)
NB: We do not resell your papers. Upon ordering, we do an original paper exclusively for you.
NB: All your data is kept safe from the public.
Introduction
Power supply is a gadget that delivers electrical energy to electronic loads. The power supply that is required in this project is an uninterrupted type, which provides emergency power when the input source fails. This power supply provides immediate protection from input power failure.
Besides preventing discontinuation of the test if power outage occurs, uninterrupted power supply can also be used to protect the test equipment from damage or data loss. The purpose of this proposal is to recommend the most appropriate alternative power supply to solve the power outage problem.
UPS Power Supply
UPS power supply comes in two forms that is, standby and online. A standby type reacts only when a power outage occurs. Consequently, it must come with a particular circuitry that promptly converts to a power backup. An online power supply does not end its supply of power to the equipment.
As such, it does not need to respond promptly when a power outage occurs. When the source of power discontinues, the devise’s batteries continues to supply the equipment with power. This type of power supply is the most preferable, though more expensive (Rashd 79).
Considerations While Choosing the Power Backups
When choosing one of these power backups, it is important to consider factors such as the amount of time the UPS battery sustains power, whether it provides any warning signal to the server when on standby and whether it has a power-conditioning feature that can trap the inward bound passing noise.
Furthermore other factors should be considered such as how the battery degrades over time, the life span of the battery, whether it provides warning signs whenever the battery’s backup power ceases to function and when the batteries need replacement.
It is also very important to consider the power requirement of the equipment that will be attached to the power UPS. For example, server installation considerations can be based on the devices that are added to it, such as CPU, monitor, wiring centers and concentrator units (Rashd 98).
The Strength of the Power Backups
UPSs have a volt-ampere rating, which are the current/amperes multiplied by the line voltage. The power equipment on which the UPS is attached should be added up then a UPS that accommodates such a load should be chosen.
First, the ampere rating on each device that is to be attached should be obtained then the rating multiplied by the voltage. The values for each device are then added up and a UPS, which can accommodate at least 20 percent above that load, is chosen.
Power supply for each chamber
Each of the chambers, including the deepfreeze and oven, should have their own power supply hence two power supplies are required. Although using one power supply can be more economical, the unique requirement of each chamber makes it necessary to differentiate the power supplies (Rashd 68).
Lease or buy decision
To decide whether it will be more economical to purchase or lease the power supplies, we shall have a practicable analysis. In this case, the power supply cost $570 (including incidental cost). If leased, however, the installment payments will be $225 per annum for five years.
The installments are inclusive of the maintenance and service costs. The salvage value of the power supply after five years is $45. The company uses straight-line method of depreciation.
If the power supply were bought, service and maintenance charges would be an average of $61.2 per annum. The cost of capital is 18%. Corporate tax is 40%. The cost analysis to show whether the company should buy or lease the equipment is performed as follows:
Present Value of Interest Payment
The purchase decision is better (Ogilvie 94).
Conclusion and recommendation
Installation of a power supply is essential as it will prevent interruptions of the tests hence avoid the penalty of $1000 per day, which is considerably a huge loss.
Even though it may be argued that the cost of buying or leasing the power supply is significant and less efficient, it should be borne in mind that a technician cannot prevent the power outage and cannot prevent test dilapidation. Hence, hiring technicians to operate the site at night can be better. Therefore, it is recommended that the power supplies be purchased to remedy the situation.
Works Cited
Ogilvie, John. CIMA Official Learning System Management Accounting Financial Strategy. New York: Butterworth-Heinemann. 2008. Print.
Rashd, Muhammad. Power Electronics Handbook: Devices, Circuits, and Applications. New York: Elsevier. 2010. Print.
Do you need this or any other assignment done for you from scratch?
We have qualified writers to help you.
We assure you a quality paper that is 100% free from plagiarism and AI.
You can choose either format of your choice ( Apa, Mla, Havard, Chicago, or any other)
NB: We do not resell your papers. Upon ordering, we do an original paper exclusively for you.
NB: All your data is kept safe from the public.